How to Use Non-Slip Backed Grinder Pads Properly

Well if you do then smoothing out work when the visible side is what you only have is going to be a challenge, cause there are things like bone handled knives. A grinder is Good to Have in Many Jobs If you are not mindful, it can also be dangerous. Therefore, RUIHONG is here to show you how to use non-slip grinder pads safely. A Little Secret By learning how to use these correctly, you can keep yourself safe, get all of your projects completed and have great results!  

Preventing Falls and Injuries with Grinder Wheels

If you use a Sanding Pad that does not have a backing on it then during use, the pad could twist and slide around.  This makes controlling the grinder very difficult, and you may end up injuring yourself scraping your install.  That is why you should use a grinder pad with anti-slip backing. This works to keep the pad secure while you are working.  So, how do you make sure that in all expectations you use these pads without any accidents? Let’s find out! 

Maximizing Your Non-Slip Grinder Pads

Step 1 — Clean and Dry SurfaceBefore you start using it, make sure the surface you are going to work on is clean and dry. If the pad or Grinding Tools  is dusty, dirty or there is water in its surface it will move. Here are some steps to clean the area in which you will work, so take sometime and do that. Then, remove the protected backing of the slip-resistance surface. So then stick the pad onto the grinder. Place your piece nice and flat in the center before giving it a good press down. This will help to keep it in place while you are working with it. 

Attach the pad and Sanding Block, turn the grinder on and start at a low speed. You want to do this because it gets you acclimated with the feel of the grinder. You can always speed it up later if need be. Hold the grinder with both hands and secure it. This will allow you to control the grinding better. As you grind down glass, move the grinder pad in a gentle manner, up and down, back and forth applying light pressure as you go. It is also important not to gather in the same place. If you do, the pad can wear unevenly which is no good! 

Take care my Non-Slip Grinder Pads

Also done using the grinder pad, but remember to turn off your grinder post finishing work and unplug it. Pull the corner of the pad while lifting it, to remove it from your grinder. Be sure to do this gently so the pad does not get pulled too hard, harming its efficacy for future times. After removing the pad, clean it with a soft brush or cloth. This will help to clean off any small dust or outside garbage that may have gotten on it. The pad can then be saved on some safe dry spot for future use. 

How to Use a Non-Slip Grinder Pad

However, the proper way to use non-slip grinder pads is important to remember so here are tips that will help you with that. Always wear safety glasses and work gloves because the wood chunks around when it cuts through them. Workers need to be as safe as they can be when using grinders. Next, just be sure to pick the correct size grit for your job. Because different projects require different degrees of smoothness, selecting the right grit will allow you to achieve your desired results. Keep increasing the grit size until you achieve the desired smoothness if you do not know which to start with. 

Protect Yourself While You Grind

You can do everything to reduce risks while working with a grinder. If you use non-slip grinder pads the right way, they can save you a whole lot more than some time and effort; they can stop you from getting hurt and your equipment damaged. Not to mention, a nice smooth finish for your project Therefore, never hesitate in giving it a shot! So keep these simple rules in your mind to be secure and get proper respectively inside your process!