How to Select the Right Sanding Pad for Your Random Orbital Sander

Sanding is simply a technique employed to make the surfaces smooth and polished. It can be applied to many materials wood, metal or plastic. you will also need a good sanding pad for the best results in sanding. The key is to sort the right sanding pad; this allows you to achieve 100% of the finish you are looking for. This is where RUIHONG comes into the picture as we help you pick the right sanding disc for your random orbital sander. 

Both Types of Sanding Pads for your Sander

Random orbital sanders are a type of tool that moves randomly and circularly. It is used to provide the flat sanding process. The center in a sander is the sanding pad, which comes into direct contact with whatever you are trying to smooth or remove. Different Types of Sanding Pads may be available, and each is meant for a different job. Types of sanding pads There are 5 main types of Sanding Pad, foam, wool, fabric, rubber and felt. 

Foam pads are simply pillow foam sandwiched between a velcro backing and your hand. Finish sanders Finish sanders are wonderful for creating a clean surface on the wood work. 

Wool pads are great for getting out scratches. It also does a great job of painting the surfaces such as turning them into glittering. 

Fabric pads are versatile. Also, you can easily switch between dry sanding and wet sanding when using them for both purposes. 

Rubber pads are too strong and durable. They are great for aggressive sanding when bulk material needs to be removed. 

FOR GIVE IT VERY FINE SAND TO ITS SURFACE, USE FELT PADS Best used for finishing delicate surfaces to a smooth finish. 

Matching the grit of the sanding pad to the material 

The grit of a sanding pad is figured by how abrasive it is. The grit is calculated by the number of rough pieces per one square inch of the pad. Grit numbers will range form 60 to 1200 or even greater. The higher the number, the smoother and finer the grit is. 

High grit between 80-120 for hardwood This will help you get a good finish without damaging the wood. 

Softwood is well sanded by a grit range of 120 to 180. The lighter woods are more delicate. 

A grit of 80 to 120 will give you decent results and remove any rough areas when sanding metal. 

A range of 180-320 grit is the norm for plastic or fiberglass. This will prevent from getting scratches and allow a smooth surface. 

Choosing your Sanding Pad, Size and Shape

The size and shape of the sanding pad also plays a great role in allowing you to work well with your project. PU Sanding Pad Grinding are available in numerous sizes and forms, and it`s pivotal that they are the best matching your project. 

For broad, flat areas a 5-inch to 6-inch wide round sanding pad. This size will help you to clean bigger area faster. 

A triangular sanding pad is the most friendly for small and difficult to get to places. The shape of it is helpful for smaller areas. 

If you have curves or rounded surface to sand, then a rounded pad is the way to go. This makes it easier to trace the outline of your material

Sanding Pad Maintenance 

Caring for your sanding pads is important because it allows them to have longer lives and work efficiency. These tips will help keep your sanding pads working like new. 

Make sure you clean your sanding pads every time you use them. To prevent dust and debris from accumulating on the pad, use a special cleaner to remove them. 

After using, you should keep the sanding pads in a dry and clean place. This will prevent them from damage/ dirt. 

Replace the sanding pad when it is worn or damaged. A worn pad will not only result in worse performances. 

Always ensure that you get the right size and type of sanding pads for your sander. Doing so will help prevent any mistakes from stacking. 

Know when to use coarse or fine-grain sandpaper depending on the material. For a perfect finish, this step is recommended. 

Sanding Pads and your Sander Together

It is easy to use your sanding pads with your random orbital sander. Simple steps that will help you get a great finish to your project:

Above all, be sure to pick the correct sanding pad and grit for your specific job. It is an essential step towards optimal results. 

Then connect the sanding pad to your machine firm and safe. 

Power it up and sand away on your material. 

While sanding, keep the machine moving in swirling and random motions. When you roll the roller over your skin, be very gentle and try not to roll too hard. 

That means checking your progress frequently so you don't over-sand. This can prevent you becoming overwhelmed, and ensure the finish you want is achieved. 

When you finish your project, finish only with the finer grit sanding pads. 

Finally, remove the material for cleaning before doing any finishing touches. 

The correct use of the sanding pad is crucial for your work to have a good finish. Once you understand the various types of sanding pads and how to match the grit, size and shape to your project, you are on your way to the perfect finish. Also, after several uses give some TLC to your sanding pads that way they will last longer and work even better. Follow these useful hints and tips to make sure your projects end with excellence, and get the RUIHONG's Glows.