How to Sand Curved Surfaces with Hook-and-Loop Sanding Pads

If your working on a piece with lots of curved surfaces sanding them can feel like rough going, But fear not. You should be able to do this well with a little practice and some useful advice, so you can make your furniture look fabulous. But, here I am going to share a few tips that will help you penance those curvy furniture. 

Now you should know how to sand around curved furniture pieces. 

As a woodworker/builder, the last thing you want to do is send out curved surfaces that come back scratchy. Curved surfaces are not like your average flat table or board and need special techniques to sand correctly. There are RUIHONG hook and loop  Sanding Pad to make the process of sanding easier and enhance optimal functioning. The pads are articulated to conform to the surface under sanding so you don't have little curves that become difficult zero in on. 

Begin sanding by taking the curved edge of a furniture wet sand pad and wrapping it securely with an abrasive sponge. Be sure the edge of the pad overlap a little bit That way you ensure you have the entire curve. Next, hand-sand the area in a circular motion. It means instead of straight lines back and forth, go round circles with your hand. This method ensures that all edges and parts of the curved surface are sanded separately. 

Sanding Round Surfaces Made Easy

Having the right tools can be a life-changer when it comes to sanding round surfaces. This is the reason why I highly recommend to use the RUIHONG hook-and-loop Sanding pads for sander and you own a sander. They fit the curves perfectly and make your job easier. Another key tip is not to sand with too much pressure. If you push down the pat of sanding disorder, to damage part surfaces. So, be careful not to take on more than you can handle and slow down. 

Using different sandpaper types will not only make your sanding project more straightforward, but it also saves time. The sandpaper grade varies, which implies some are unlikely while others are rough. Always begin with a coarser grit to assist in shaping and smoothing the area, followed by finer ones for an even smoother end result. This long process ensures that the surface is at its best. 

How to Sand Curved Surfaces Dos and Don't

Do's:

Stick with RUIHONG hook-and-loop Circular sanding pads  as they are designed to contours cushioned surfaces

Even with sandpaper, always keep your contact light to avoid causing damage back at the surface of furniture. 

Have a variety of grades of sandpaper. First use a coarser grain and then apply it with finer grains. 

Don't Forget to Sand in the Circle This way you avoid scratches and your product looks nicer. 

Don'ts: 

You should never ever use plain sandpaper for curved surfaces. It does not adhere as well and becomes a lot tougher to sand in the long run. 

Avoid pressing hard when sanding. The surface may be scratched or dented. 

Do not Sand in Just one side A circular motion will help you minimize scratches and achieve the perfect final finish. 

Step It Up a Notch for Your Woodworking Projects

Since sanding a surface with lots of curves is hard, The RUIHONG hook-and-loop sanding pads does the job as long, you move it in circular motion and use little pressure to finish nothing not only smoothness but beautiful. Practice makes perfect. Those are some tips that all your woodworking projects will look very nice. Make sure that you sand it down carefully, and take your time to do what needs to be done. You will enjoy taking pride in working hard to make a great finish.